Need help? Call us: (+86) 07 12 47 38 or info@G-Sparts.com
On Sale This Week
Get the Right Part at the Right Price for the Comfort of Your Vehicle
Plakrore maheten. Astronens ultranirad. Dod.
NiBK RN1241V (Vented) Front Brake Disc for Geely Emgrand X7 (2013–2025) is engineered for confident, quiet, and reliable stopping performance on daily commutes and long highway runs alike. Precision-machined to tight lateral runout tolerances and balanced to reduce vibration, this rotor pairs seamlessly with OEM or premium aftermarket pads to deliver consistent pedal feel and shorter stopping distances. Its vented design improves heat dissipation during repeated braking events, while a corrosion-resistant surface finish helps preserve appearance and longevity in harsh climates. Optimized metallurgy and strict dimensional control support stable friction, reduced judder risk, and extended service life. Choose it to restore factory braking performance, simplify installation, and protect your investment in the Emgrand X7.
Read more
Add to Wishlist
Add to Wishlist
Brembo 08.5878.10 Front Brake Disc for Geely CK 1.3 (first generation) (2005–2013) – (Solid) restores factory-true braking with refined pedal feel and low NVH. Cast from tightly controlled gray iron and precision-machined for minimal runout and disc thickness variation, this solid front rotor delivers linear torque in city traffic and predictable response on highways. A protective coating on non-swept areas helps resist hub seizure and edge rust, while a balanced friction ring supports smooth bedding with ceramic or semi-metallic pads. Designed for exact fitment on CK 1.3 first-gen hubs, it installs cleanly, pairs well with quality pads, and keeps steering calm and confidence high mile after mile.
Read more
Add to Wishlist
Add to Wishlist
Genuine Honda Rear Brake Disc 42510-SWA-A02 – CR-V (2010–2012; Japan-built) restores factory-true braking on Japan-built third-gen CR-V models, delivering smooth pedal feel, quiet operation, and dependable stopping in city traffic and on highways. Cast from tightly specified gray iron and finish-machined for minimal runout and disc thickness variation, the rotor supports quick, uniform pad transfer for quieter torque and stable stopping distances. Protective coatings on the hat and edges help fight corrosion, easing future wheel removal and preserving balance aesthetics. Exact hub bore, offset, and bolt pattern match OE geometry for a clean install with accurate ABS readings. Pair with reputable pads and fresh hardware to unlock whisper-calm deceleration, consistent modulation, and long service life.
Read more
Add to Wishlist
Add to Wishlist
Genuine Honda Front Brake Disc 45251-TA0-A01 – Accord (2003–2011) / Fit EV (2014) delivers factory-correct geometry, smooth pedal feel, and dependable heat control for daily driving. Precision machining holds runout and parallelism tight, helping pads bed quickly and evenly to prevent judder later in the service life. The vented core promotes airflow for fade resistance on downhill sections and repeated city stops, while a protective coating shields hats and vanes from corrosion so wheels look clean behind open spokes. Optimized gray-iron metallurgy resists hot spots and hairline checks through seasonal temperature swings. Installation is straightforward, and performance stays predictable—exactly the quiet, composed braking behavior you expect from Honda platforms when maintained with OE-spec components.
Read more
Add to Wishlist
Add to Wishlist
Genuine Honda Front Brake Disc 45251-TA5-A00 – Accord (2003–2012; Coupe & Sedan) is a factory-spec vented rotor designed to restore the calm, linear pedal feel Honda engineered for 7th/8th-gen Accord models. Tight control of runout and parallelism supports quick bedding and even pad contact, while a protective coating defends the hat and vanes against corrosion for cleaner looks behind open-spoke wheels. Optimized gray-iron metallurgy balances hardness and thermal conductivity to resist hot-spotting and thickness variation over long service intervals. The result is predictable bite in city traffic, confident stability on highway descents, and low NVH at parking-lot speeds. Installers appreciate true drop-in fitment; owners enjoy quiet, repeatable braking day after day.
Read more
Add to Wishlist
Add to Wishlist
Genuine Honda Front Brake Disc 45251-TEG-A00 – Civic (2019–2020 LX/Sport/EX/EX-L) is engineered to restore factory braking feel with precise runout control, uniform surface finish, and OE-correct hat and offset dimensions. Built from tightly specified gray iron and dynamically balanced, this rotor delivers smooth pedal response in city traffic and confident stability at highway speeds. A protective coating on non-swept areas helps resist hub seizure and edge corrosion, while the friction ring is machined for fast, even pad transfer during bedding. The result is quiet, linear deceleration, reduced pulsation risk, and extended service intervals when paired with quality pads. If you value authentic fitment, predictable stopping, and long-term reliability, this is the Civic rotor to choose.
Read more
Add to Wishlist
Add to Wishlist
Genuine Honda Front Brake Disc 45251-TBA-A00 – Civic (2016–2021) / Accord (2016–2017) is an OE-spec rotor designed to restore factory stopping power, pedal feel, and NVH control. Precision machining tightens lateral runout and parallelism, promoting even pad contact and fast bedding. The vented design improves heat rejection on urban commutes and mountain descents, while an anti-corrosion coating protects the hat and vanes for cleaner looks behind open-spoke wheels. Optimized metallurgy resists hot spotting and crack initiation across repeated heat cycles, helping maintain smooth, linear deceleration. Installation is straightforward, fitment is exact, and performance is predictable—ideal for drivers who expect the same quiet confidence and refinement Honda engineered into Civic and Accord platforms from day one.
Read more
Add to Wishlist
Add to Wishlist
Genuine Mitsubishi Front Brake Disc MR205215 – Lancer X (2008–2025) / Outlander II (2003–2012) restores factory braking feel with OE-true geometry, vented heat management, and refined NVH. Precisely machined faces control runout and disc-thickness variation, reducing pulsation while promoting a fast, even pad transfer layer for quiet torque. Coated hats and edges resist corrosion to ease future wheel removal and preserve clean looks behind open spokes. The correct hub bore, hat offset, and bolt pattern ensure clean caliper centering and accurate ABS signals, streamlining installation for technicians and delivering a linear, confidence-inspiring pedal for drivers. Pair this rotor with quality pads, renewed hardware, and fresh DOT 4 fluid to unlock smooth deceleration, predictable modulation, and long, low-maintenance service life.
Read more
Add to Wishlist
Add to Wishlist
The Genuine Mitsubishi Front Brake Disc MR389727 – Lancer VIII / Outlander I/II (Vented) is an OEM component engineered for superior stopping performance and reliability. Designed to meet Mitsubishi’s strict factory standards, this vented front brake disc ensures efficient heat dissipation, reducing the risk of brake fade even under heavy loads. Built from high-grade steel alloys, it provides maximum durability, corrosion resistance, and long service life. Whether driving a Lancer VIII or an Outlander I/II, this disc guarantees precise fitment, seamless installation, and consistent braking confidence. For those who prioritize safety and factory-original quality, this OEM front brake disc is the ultimate replacement solution.
Read more
Add to Wishlist
Add to Wishlist
Genuine Mitsubishi Front Brake Disc MR389724 – Lancer VIII / Galant / Eclipse (Vented) restores factory braking feel with exact OE geometry, refined pedal response, and disciplined NVH control. The vented friction ring and precise vane design improve heat rejection, while tight runout and disc-thickness tolerances reduce pulsation risk. A protective coating on non-swept areas fights corrosion, easing future rotor removal and preserving clean aesthetics behind open wheels. Machined faces promote quick, even pad transfer for quieter torque and consistent deceleration in city traffic or highway descents. With the correct hub bore, hat offset, and bolt pattern, installation is straightforward. Pair with quality pads, fresh hardware, and DOT 4 fluid to enjoy smooth, predictable stopping and long, low-maintenance service.
Read more
Add to Wishlist
Add to Wishlist
Genuine Mitsubishi Rear Brake Disc 4615A193 – Lancer (2008–2016) / Outlander (2008–2016) restores factory braking feel with exact OE geometry, smooth pedal response, and disciplined NVH control. The rotor is cast from tightly specified gray iron and finish-machined to minimize runout and disc thickness variation, supporting quick, uniform pad transfer for quieter torque and consistent stopping distances. A protective coating on non-swept areas helps fight rust, easing future wheel removal and preserving a clean appearance behind open spokes. With the correct hub bore, hat offset, and bolt pattern, installation is fast and straightforward for technicians. Pair with quality pads, renewed hardware, and fresh DOT 4 fluid to enjoy composed deceleration, straight-line stability, and long service life in city or highway driving.
Read more
Add to Wishlist
Add to Wishlist
Genuine Mitsubishi Rear Brake Disc MB928716 (MB895200) – Eclipse II/III, Lancer VII/VIII, Outlander I/II is the trusted OE-grade rotor for restoring factory braking performance with precise fitment and quiet operation. Manufactured to Mitsubishi specifications, it features controlled metallurgy, accurate runout, and a bedding-friendly surface for smooth, predictable deceleration. The hat and non-friction areas receive protective treatment to resist rust, while the friction faces are ground for rapid pad seating and stable torque. Technicians appreciate the clean installation, balanced geometry, and consistent pedal feel; drivers notice confident stops in wet or dry conditions. Pair this disc with quality pads to minimize noise and dust, protect wheel bearings and ABS sensors, and extend overall brake system life for daily commuting or long trips.
Read more
Add to Wishlist
Add to Wishlist
Genuine Toyota Front Brake Disc 43512-02240 – Corolla (2008–2019) / Scion xD / Matrix delivers the OEM precision, safety, and durability that discerning Toyota owners expect. Engineered to Toyota’s exact tolerances, this front rotor provides consistent friction stability, excellent heat dissipation, and reduced judder for confident stops in city and highway driving. Robust metallurgy and precision machining minimize runout and thickness variation, extending pad life while keeping braking quiet and predictable. This part fits popular platforms across multiple years, simplifying service for owners and workshops alike. Backed by rigorous testing, global quality standards, and G-Sparts’ expert support, it’s the smart upgrade when your original rotors reach service limits—reliability you can feel on every press of the pedal.
Read more
Add to Wishlist
Add to Wishlist
Genuine Toyota Front Brake Disc 43512-42010 – RAV4 (1996–2004) restores factory braking feel, quiet operation, and consistent stopping distances on first- and second-generation RAV4 models. Cast from tightly specified gray iron and precision-machined for parallel faces, this rotor controls runout and disc-thickness variation to keep the pedal smooth and ABS readings clean. Coated hats and edges resist corrosion for easier wheel removal and tidy looks behind open spokes, while a uniform ring finish speeds pad transfer for stable torque. Exact hub bore, hat offset, and bolt pattern make installation straightforward for technicians and deliver a linear, confident pedal for drivers. Pair with quality pads, renewed hardware, and correct wheel torque to unlock long, low-maintenance service.
Read more
Add to Wishlist
Add to Wishlist
Genuine Toyota Rear Brake Disc 42431-06120 – Camry (2012–2017) / Avalon (2013–2018) is engineered to restore the factory-straight, whisper-quiet feel of Toyota’s rear axle. Each rotor is cast from tightly specified gray iron and finish-machined to control runout and disc-thickness variation, helping ABS read clean signals and keeping the pedal calm. Non-swept areas receive protective coating to resist rust and ease future wheel removal, while a uniform ring finish supports fast, even pad transfer for stable torque. Exact hub bore, hat offset, and bolt pattern simplify installation for technicians and deliver consistent, predictable stops for drivers. Pair this rotor with quality pads, refreshed hardware, and correctly torqued wheels to enjoy long, low-maintenance service on city streets and open highways.
Read more
Add to Wishlist
Add to Wishlist
Genuine Toyota Front Brake Disc 43512-06200 – Camry (2018–2024) / Avalon (2019–2022) / Corolla Cross (2022–2025) / RAV4 (2019–2024) is a factory-engineered OEM brake disc designed to deliver maximum safety, durability, and seamless compatibility with Toyota’s most popular mid-size and crossover models. Crafted from high-strength alloy steel and tested under rigorous standards, this brake disc ensures consistent braking performance, heat dissipation, and reduced wear, even under demanding driving conditions. As a genuine Toyota part, it offers precise fitment, extended service life, and full compliance with international standards such as ASTM specifications.
Read more
Add to Wishlist
Add to Wishlist
Genuine Toyota Front Brake Disc 43512-06150 – Avalon (2007–2018) / Camry (2007–2017) is engineered to restore factory braking feel, quiet operation, and dependable stopping power to two of Toyota’s most trusted platforms. Each rotor is cast from tightly specified gray iron, then precision-machined to control runout and disc-thickness variation for a smooth, linear pedal. Coated hats and outer edges resist corrosion, easing future wheel removal and preserving a neat look behind open spokes. Exact hub bore, hat offset, and friction-ring placement center the caliper for consistent pad contact and cleaner ABS signals. Pair with quality pads, refreshed hardware, and properly torqued wheels to enjoy quiet deceleration, straight-line stability, and long service life in city traffic and highway use.
Read more
Add to Wishlist
Add to Wishlist
G-SPARTS – Leading Auto Parts Supplier Since 2009
Trusted by 1000+ Clients Worldwide | Chinese (BYD, Geely, Chery, …), Japanese (Toyota, Honda, Nissan, …), European (BMW, Mercedes, VW, …) & American (Ford, Chevrolet, Tesla, …) Car Spares | Best Prices & OEM Quality | 15+ Years Expertise | Professional Team, Fast Global Shipping
Hotline:
(+86) 18007124738
WeChat, Telegram, WhatsApp
working hours: 7/24
GuangZhou Office:
Room A78, 24th Floor, No. 111-115, Sports West Road, Tianhe District, Guangzhou, China.
Wuhan Office:
No. C4-01-19-5, 4th Floor, No. 371 Youyi Avenue, Xujiapeng Street, Wuchang District, Wuhan City, China.
- Wholesale Auto Parts from China – Lowest Prices, Top Quality & Dedicated Support
- Fast Shipping. Trusted Parts. Worldwide Delivery.

















