Need help? Call us: (+86) 07 12 47 38 or info@G-Sparts.com
On Sale This Week
Get the Right Part at the Right Price for the Comfort of Your Vehicle
Plakrore maheten. Astronens ultranirad. Dod.
Alternative OE‑pattern clutch kit for **BYD G3/L3/F3** (2010–2016). Many sellers list **Ø200–210 mm** with OE refs **488QA‑1601100 / 488QA‑1601200**. Includes disc, cover & release bearing.
Read more
Add to Wishlist
Add to Wishlist
Clutch Kit LuK RepSet 620 3221 00 for BYD Complete clutch kit for **BYD F3/F3R/G3/L3 1.5** (manual, 2006–2016). Ø200 mm disc, ~20‑tooth spline. Includes disc, pressure plate & release bearing. OE refs: BYDF3‑1601200 / BYDF3‑1601100 / 1601910.
Read more
Add to Wishlist
Add to Wishlist
Throttle Position Sensor for BYD F3, F3R, G3, G6, L3, S6, E6, Tang, Song, Qin, F5, G5 (2005–2019). Electric TPS, 2‑wire. Direct replacement — verify fitment by VIN.
Read more
Add to Wishlist
Add to Wishlist
Throttle Position Sensor for BYD F3, F3R, G3, G6, L3, S6, E6, Tang, Song, Qin, F5, G5 (2005–2019). Electric TPS, 2‑wire. Direct replacement — verify fitment by VIN.
Read more
Add to Wishlist
Add to Wishlist
Throttle Position Sensor for BYD F3, F3R, G3, G6, L3, S6, E6, Tang, Song, Qin, F5, G5 (2005–2019). Electric TPS, 2‑wire. Direct replacement — verify fitment by VIN.
Read more
Add to Wishlist
Add to Wishlist
Throttle Position Sensor for BYD F3, F3R, G3, G6, L3, S6, E6, Tang, Song, Qin, F5, G5 (2005–2019). Electric TPS, 2‑wire. Direct replacement — verify fitment by VIN.
Read more
Add to Wishlist
Add to Wishlist
Throttle Position Sensor for BYD F3, F3R, G3, G6, L3, S6, E6, Tang, Song, Qin, F5, G5 (2005–2019). Electric TPS, 2‑wire. Direct replacement — verify fitment by VIN.
Read more
Add to Wishlist
Add to Wishlist
BYD MAF Sensor 22680-AA380 for 2010–2015 BYD G3, G6, L3. OEM 22680-AA380 with 5-pin connector, hot-wire type ensures accurate air intake measurement.
Read more
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
BYD ABS Sensor BYDEG-3630200 for BYD F3, F6, G3, L3 (2010–2025). Trusted magnetic design for ABS accuracy.
Read more
Add to Wishlist
Add to Wishlist
BYD ABS Sensor BYDEG-3630300 for BYD F3, F6, G3, L3 (2010–2025). Reliable 2-wire magnetic sensor for accurate braking.
Read more
Add to Wishlist
Add to Wishlist
BYD Fuel Filter Bosch 0986AF8188 – BYD F0, F3, F3R, G3, L3, M6, G6, F6, S6 (pre-hybrid/EV trims, broad gasoline ICE use) offers trusted Bosch media technology that captures fine particulates while maintaining low restriction for steady fuel pressure. OE-level tolerances ensure a tight, leak-free fit across supported platforms, reducing pump strain and helping restore crisp throttle response. Corrosion-resistant materials stand up to humidity and winter salts, extending service life. Ideal for multi-model garages and fleet maintenance, it simplifies stocking while keeping drivability consistent. Verify compatibility by VIN or catalog, then replace on schedule to protect injectors, sustain fuel economy, and keep your BYD lineup running clean and confident.
Read more
Add to Wishlist
Add to Wishlist
BYD Fuel Filter F3-1105110 – BYD F3 (1.5/1.6L), possibly F3R, G3, L3 sharing same fuel system provides high-efficiency particle capture without choking flow, helping maintain stable pressure and quiet pump operation. OE-accurate dimensions and sealing surfaces secure a leak-free install for confidence on busy commutes. Corrosion-resistant construction and robust endcaps deliver durability across temperature swings and seasonal fuels. Ideal for preventative maintenance on compact sedans, it helps prevent hesitation, misfires, and power loss linked to dirty fuel. Confirm cross-fit by VIN or module code, then replace at recommended intervals to protect injectors, preserve mileage, and keep your BYD smooth, economical, and responsive.
Read more
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Reliable BYD oil filter for F3 / G3 / L3 1.5–1.6 (2005–2015). Widely used legacy BYD 473QA engines.
Read more
Add to Wishlist
Add to Wishlist
NiBK PN1472 Front Brake Pads for BYD F3/F3R (2005–2025) & G3 (2009–2025) deliver precise fit, stable friction, and low-NVH road manners for daily, fleet, and highway duty. Engineered chamfers, slots, and multilayer shims work with OE-style backplates to reduce squeal while supporting confident pedal feel in wet or dry conditions. Rotor-friendly formulation encourages an even transfer layer that preserves disc finish and keeps wheels cleaner between washes. Each set arrives ready for professional installation with consistent thickness, density, and bonding for long, predictable service. If you maintain BYD F3/F3R or G3 platforms, these pads align well with factory caliper geometry and help restore braking refinement with minimal break-in time.
Read more
Add to Wishlist
Add to Wishlist
Genuine Mitsubishi Front Brake Disc MR205215 – Lancer X (2008–2025) / Outlander II (2003–2012) restores factory braking feel with OE-true geometry, vented heat management, and refined NVH. Precisely machined faces control runout and disc-thickness variation, reducing pulsation while promoting a fast, even pad transfer layer for quiet torque. Coated hats and edges resist corrosion to ease future wheel removal and preserve clean looks behind open spokes. The correct hub bore, hat offset, and bolt pattern ensure clean caliper centering and accurate ABS signals, streamlining installation for technicians and delivering a linear, confidence-inspiring pedal for drivers. Pair this rotor with quality pads, renewed hardware, and fresh DOT 4 fluid to unlock smooth deceleration, predictable modulation, and long, low-maintenance service life.
Read more
Add to Wishlist
Add to Wishlist
The Genuine Mitsubishi Front Brake Disc MR389727 – Lancer VIII / Outlander I/II (Vented) is an OEM component engineered for superior stopping performance and reliability. Designed to meet Mitsubishi’s strict factory standards, this vented front brake disc ensures efficient heat dissipation, reducing the risk of brake fade even under heavy loads. Built from high-grade steel alloys, it provides maximum durability, corrosion resistance, and long service life. Whether driving a Lancer VIII or an Outlander I/II, this disc guarantees precise fitment, seamless installation, and consistent braking confidence. For those who prioritize safety and factory-original quality, this OEM front brake disc is the ultimate replacement solution.
Read more
Add to Wishlist
Add to Wishlist
Genuine Mitsubishi Rear Brake Disc MB928716 (MB895200) – Eclipse II/III, Lancer VII/VIII, Outlander I/II is the trusted OE-grade rotor for restoring factory braking performance with precise fitment and quiet operation. Manufactured to Mitsubishi specifications, it features controlled metallurgy, accurate runout, and a bedding-friendly surface for smooth, predictable deceleration. The hat and non-friction areas receive protective treatment to resist rust, while the friction faces are ground for rapid pad seating and stable torque. Technicians appreciate the clean installation, balanced geometry, and consistent pedal feel; drivers notice confident stops in wet or dry conditions. Pair this disc with quality pads to minimize noise and dust, protect wheel bearings and ABS sensors, and extend overall brake system life for daily commuting or long trips.
Read more
Add to Wishlist
Add to Wishlist
Genuine Mitsubishi Front Brake Pad Kit 4605A317 (MN102618) – Lancer (2000–2014), Outlander I/II (2001–2014), ASX (2010–2025) delivers factory braking feel with precise fit, quiet operation, and dependable bite across city, highway, and light off-road use. The OE friction matrix, multi-layer shims, and tuned chamfers/slots suppress squeal and stabilize μ from cool starts to long descents, while rigid backing plates preserve a parallel contact patch that protects rotors from tapered wear. Accurate pad geometry speeds bedding and helps ABS/ESC read consistent signals for straight, predictable stops on wet or dry pavement. Each kit includes the right hardware to refresh the caliper interface, cutting installation time and reducing callbacks. Choose it for authentic fitment, clean wheels, and long, low-maintenance service life.
Read more
Add to Wishlist
Add to Wishlist
The Genuine Mitsubishi Front Brake Pad Kit 4605A261 – ASX (2010–2025), Lancer (2000–2014), Outlander I/II (2001–2014) is an OEM-grade component engineered to provide maximum safety, durability, and reliable performance. Designed according to Mitsubishi’s strict factory standards, this kit ensures excellent stopping power, smooth braking, and optimal fitment. Made from high-quality friction materials, it delivers consistent performance across different driving conditions while minimizing wear and tear on the braking system. Compatible with Mitsubishi ASX, Lancer, and Outlander I/II models, this kit offers peace of mind with precise installation and factory-level dependability. For drivers who prioritize OEM reliability and consistent safety, these genuine front brake pads are the perfect replacement choice.
Read more
Add to Wishlist
Add to Wishlist
G-SPARTS – Leading Auto Parts Supplier Since 2009
Trusted by 1000+ Clients Worldwide | Chinese (BYD, Geely, Chery, …), Japanese (Toyota, Honda, Nissan, …), European (BMW, Mercedes, VW, …) & American (Ford, Chevrolet, Tesla, …) Car Spares | Best Prices & OEM Quality | 15+ Years Expertise | Professional Team, Fast Global Shipping
Hotline:
(+86) 18007124738
WeChat, Telegram, WhatsApp
working hours: 7/24
GuangZhou Office:
Room A78, 24th Floor, No. 111-115, Sports West Road, Tianhe District, Guangzhou, China.
Wuhan Office:
No. C4-01-19-5, 4th Floor, No. 371 Youyi Avenue, Xujiapeng Street, Wuchang District, Wuhan City, China.
- Wholesale Auto Parts from China – Lowest Prices, Top Quality & Dedicated Support
- Fast Shipping. Trusted Parts. Worldwide Delivery.






















