Need help? Call us: (+86) 07 12 47 38 or info@G-Sparts.com
On Sale This Week
Get the Right Part at the Right Price for the Comfort of Your Vehicle
Plakrore maheten. Astronens ultranirad. Dod.
Clutch Kit uses release bearing 1601910 3‑piece clutch kit reference for **BYD G5/G6/Sirui** (~2013–2017) with **6DT25** gearbox group. Release bearing **1601910** commonly cataloged across BYD ICE models. Verify disc/cover size by VIN.
Read more
Add to Wishlist
Add to Wishlist
O₂ sensor for Lancer, Outlander, Pajero/Montero, Eclipse Cross, ASX, etc. – Upstream or downstream (per Denso SKU). Specs: Denso SKUs are often 4‑wire heated for upstream; wire length/connector vary by SKU.
Read more
Add to Wishlist
Add to Wishlist
O₂ sensor for Pajero/Montero, Triton/L200, Outlander, Lancer (2000s–2010s) – Upstream or downstream (engine dependent). Specs: Upstream commonly 4‑wire heated; older legacy engines may be 1–2 wire non‑heated.
Read more
Add to Wishlist
Add to Wishlist
O₂ sensor for Lancer, Outlander Sport, select Outlander variants (≈2008–2018) – Upstream (pre‑cat). Specs: Typically 4‑wire heated upstream; OE connector & harness; verify probe length.
Read more
Add to Wishlist
Add to Wishlist
Throttle Position Sensor for BYD F3, F3R, G3, G6, L3, S6, E6, Tang, Song, Qin, F5, G5 (2005–2019). Electric TPS, 2‑wire. Direct replacement — verify fitment by VIN.
Read more
Add to Wishlist
Add to Wishlist
Throttle Position Sensor for BYD F3, F3R, G3, G6, L3, S6, E6, Tang, Song, Qin, F5, G5 (2005–2019). Electric TPS, 2‑wire. Direct replacement — verify fitment by VIN.
Read more
Add to Wishlist
Add to Wishlist
Throttle Position Sensor for BYD F3, F3R, G3, G6, L3, S6, E6, Tang, Song, Qin, F5, G5 (2005–2019). Electric TPS, 2‑wire. Direct replacement — verify fitment by VIN.
Read more
Add to Wishlist
Add to Wishlist
Throttle Position Sensor for BYD F3, F3R, G3, G6, L3, S6, E6, Tang, Song, Qin, F5, G5 (2005–2019). Electric TPS, 2‑wire. Direct replacement — verify fitment by VIN.
Read more
Add to Wishlist
Add to Wishlist
Throttle Position Sensor for BYD F3, F3R, G3, G6, L3, S6, E6, Tang, Song, Qin, F5, G5 (2005–2019). Electric TPS, 2‑wire. Direct replacement — verify fitment by VIN.
Read more
Add to Wishlist
Add to Wishlist
MAF Sensor for 1999–2005 Mitsubishi Outlander, Galant, Lancer. OEM MD336501 with 5-pin connector, hot-wire type for precise airflow measurement and stable idle.
Read more
Add to Wishlist
Add to Wishlist
MAF Sensor for 1997–2007 Mitsubishi Mirage, Lancer, Montero. OEM MD343605 with 5-pin connector, hot-wire type for precise airflow measurement and stable idle.
Read more
Add to Wishlist
Add to Wishlist
BYD MAF Sensor 22680-AA380 for 2010–2015 BYD G3, G6, L3. OEM 22680-AA380 with 5-pin connector, hot-wire type ensures accurate air intake measurement.
Read more
Add to Wishlist
Add to Wishlist
Mitsubishi Fuel Filter MR239580 – Mitsubishi Lancer and sedan models (gasoline, various years) restores crisp throttle response by trapping varnish, rust, and tank debris before they reach precision injectors. High-capacity, low-restriction media protects pump health and keeps fuel pressure steady for quiet idle and confident passing. OE-accurate ports and seals simplify installation and help prevent leaks under heat and vibration. Built with corrosion-resistant housings for long life, it’s a smart preventative upgrade for daily commuters and fleet use. Verify trim coverage by VIN, then replace at factory intervals or when symptoms—hard starts, surging, hesitation—appear to maintain economy, reliability, and enjoyable drivability.
Read more
Add to Wishlist
Add to Wishlist
BYD Fuel Filter Bosch 0986AF8188 – BYD F0, F3, F3R, G3, L3, M6, G6, F6, S6 (pre-hybrid/EV trims, broad gasoline ICE use) offers trusted Bosch media technology that captures fine particulates while maintaining low restriction for steady fuel pressure. OE-level tolerances ensure a tight, leak-free fit across supported platforms, reducing pump strain and helping restore crisp throttle response. Corrosion-resistant materials stand up to humidity and winter salts, extending service life. Ideal for multi-model garages and fleet maintenance, it simplifies stocking while keeping drivability consistent. Verify compatibility by VIN or catalog, then replace on schedule to protect injectors, sustain fuel economy, and keep your BYD lineup running clean and confident.
Read more
Add to Wishlist
Add to Wishlist
Mitsubishi Air Filter Other OEM / Aftermarket listings – Lancer, Outlander, Outlander Sport, ASX/RVR, Mirage, Outlander PHEV (2012–2025) delivers high-capture, low-restriction intake filtration tailored to popular Mitsubishi platforms. Precision-pleated media traps fine dust and pollen while preserving airflow for smooth throttle and efficient combustion. OE-accurate frames and seals help prevent bypass dirt that can skew sensors, and rugged materials resist heat and humidity across daily cycles. Choose from reputable brands to match budget and performance goals, including long-life and performance options. Verify fitment by VIN or airbox code, then replace at factory intervals—earlier in dusty regions—to sustain fuel economy, reduce induction noise, and keep your Mitsubishi driving confident.
Read more
Add to Wishlist
Add to Wishlist
Mitsubishi Air Filter MR968274 – Outlander / Outlander Sport (2013–2025), Lancer, RVR / ASX 2.0L / 2.4L NA delivers clean, consistent intake air with a low-restriction element that sustains throttle response and day-to-day efficiency. Precision-molded frames and seals ensure a tight, leak-free fit across shared housings, blocking bypass dust that can contaminate MAF sensors. Durable, moisture-resistant materials hold shape through heat cycles and stop-go driving. DIY replacement is quick and tool-light. Replace at recommended intervals—or sooner in dusty regions—to maintain smooth idle, reduce induction noise, and protect engine components in your Mitsubishi crossover or sedan.
Read more
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Ultimate Performance: NiBK RN1218 Vented Front Rotor for BYD F6 (2008–2025) / G6 2.0L (2011–2025) – Precision-Engineered Braking Excellence
In Stock
NiBK RN1218 Vented Front Rotor for BYD F6 (2008–2025) / G6 2.0L (2011–2025) is tuned for rapid heat rejection, consistent runout, and smooth pedal feel under repeated stops. Precision machining, balanced vent geometry, and a corrosion-protective finish help preserve pad life and reduce judder risk across mixed urban and highway duty. Designed to pair seamlessly with OE-style calipers on BYD F6 and G6 2.0L platforms, this rotor supports quiet operation, predictable ABS behavior, and long service intervals—ideal for private owners and fleets seeking dependable, factory-like performance with professional installation.
Add to cart
Add to Wishlist
Add to Wishlist
Genuine Mitsubishi Front Brake Pad Kit 4605A317 (MN102618) – Lancer (2000–2014), Outlander I/II (2001–2014), ASX (2010–2025) delivers factory braking feel with precise fit, quiet operation, and dependable bite across city, highway, and light off-road use. The OE friction matrix, multi-layer shims, and tuned chamfers/slots suppress squeal and stabilize μ from cool starts to long descents, while rigid backing plates preserve a parallel contact patch that protects rotors from tapered wear. Accurate pad geometry speeds bedding and helps ABS/ESC read consistent signals for straight, predictable stops on wet or dry pavement. Each kit includes the right hardware to refresh the caliper interface, cutting installation time and reducing callbacks. Choose it for authentic fitment, clean wheels, and long, low-maintenance service life.
Read more
Add to Wishlist
Add to Wishlist
The Genuine Mitsubishi Front Brake Pad Kit 4605A261 – ASX (2010–2025), Lancer (2000–2014), Outlander I/II (2001–2014) is an OEM-grade component engineered to provide maximum safety, durability, and reliable performance. Designed according to Mitsubishi’s strict factory standards, this kit ensures excellent stopping power, smooth braking, and optimal fitment. Made from high-quality friction materials, it delivers consistent performance across different driving conditions while minimizing wear and tear on the braking system. Compatible with Mitsubishi ASX, Lancer, and Outlander I/II models, this kit offers peace of mind with precise installation and factory-level dependability. For drivers who prioritize OEM reliability and consistent safety, these genuine front brake pads are the perfect replacement choice.
Read more
Add to Wishlist
Add to Wishlist
Filter by price
Brands
- Bosch (1)
- Bosch; ACSUZ; Unbranded (1)
- BYD OEM (3)
G-SPARTS – Leading Auto Parts Supplier Since 2009
Trusted by 1000+ Clients Worldwide | Chinese (BYD, Geely, Chery, …), Japanese (Toyota, Honda, Nissan, …), European (BMW, Mercedes, VW, …) & American (Ford, Chevrolet, Tesla, …) Car Spares | Best Prices & OEM Quality | 15+ Years Expertise | Professional Team, Fast Global Shipping
Hotline:
(+86) 18007124738
WeChat, Telegram, WhatsApp
working hours: 7/24
GuangZhou Office:
Room A78, 24th Floor, No. 111-115, Sports West Road, Tianhe District, Guangzhou, China.
Wuhan Office:
No. C4-01-19-5, 4th Floor, No. 371 Youyi Avenue, Xujiapeng Street, Wuchang District, Wuhan City, China.
- Wholesale Auto Parts from China – Lowest Prices, Top Quality & Dedicated Support
- Fast Shipping. Trusted Parts. Worldwide Delivery.






















