Need help? Call us: (+86) 07 12 47 38 or info@G-Sparts.com
On Sale This Week
Get the Right Part at the Right Price for the Comfort of Your Vehicle
Plakrore maheten. Astronens ultranirad. Dod.
**3‑piece clutch kit** for **Honda K24 manuals**: **Accord 2003–2007**, **CR‑V 2002–2006**, **Element 2003–2009**. Aftermarket ref **EXEDY HCK1004**. Dealer specs: **Ø228 mm (9″)** disc.
Read more
Add to Wishlist
Add to Wishlist
O₂ sensor for Lancer, Outlander, Pajero/Montero, Eclipse Cross, ASX, etc. – Upstream or downstream (per Denso SKU). Specs: Denso SKUs are often 4‑wire heated for upstream; wire length/connector vary by SKU.
Read more
Add to Wishlist
Add to Wishlist
O₂ sensor for Pajero/Montero, Triton/L200, Outlander, Lancer (2000s–2010s) – Upstream or downstream (engine dependent). Specs: Upstream commonly 4‑wire heated; older legacy engines may be 1–2 wire non‑heated.
Read more
Add to Wishlist
Add to Wishlist
O₂ sensor for Lancer, Outlander Sport, select Outlander variants (≈2008–2018) – Upstream (pre‑cat). Specs: Typically 4‑wire heated upstream; OE connector & harness; verify probe length.
Read more
Add to Wishlist
Add to Wishlist
MAF Sensor for 1999–2005 Mitsubishi Outlander, Galant, Lancer. OEM MD336501 with 5-pin connector, hot-wire type for precise airflow measurement and stable idle.
Read more
Add to Wishlist
Add to Wishlist
MAF Sensor for 1997–2007 Mitsubishi Mirage, Lancer, Montero. OEM MD343605 with 5-pin connector, hot-wire type for precise airflow measurement and stable idle.
Read more
Add to Wishlist
Add to Wishlist
MAF Sensor for 2010–2025 Honda Accord, Civic, CR‑V, Crosstour, Element, Pilot. OEM 37980-RC0-M01 with 5-pin connector, hot-wire type for accurate airflow measurement.
Read more
Add to Wishlist
Add to Wishlist
Cabin Air Filter OEM 80292-S5D-416 – Honda CR-V 2002–2006 delivers an OEM-exact fit that restores clean, steady airflow while protecting your HVAC from dust, pollen, and road soot. Multi-layer gradient media captures coarse debris and ultrafine aerosols with a predictable pressure drop, so you reach comfort without maxing the fan. A rigid frame and uniform gasket compression prevent bypass, keeping the evaporator cleaner, reducing odors, and shortening defog times in mixed weather. Installation is quick at the glovebox with clear airflow arrows and shop-friendly packaging. Whether you’re commuting or road-tripping, this specification elevates comfort, preserves component life, and keeps your CR-V interior feeling fresh with every mile—professional performance in a simple, affordable service.
Read more
Add to Wishlist
Add to Wishlist
Honda Fuel Filter 17048-SXSA30 – Honda CR-V (various trims/years) preserves injector health and responsive drivability with fine-micron media that traps debris without choking flow. Built to OE specifications, it seats securely for a leak-tight connection, sustaining rail pressure and minimizing pump strain. The durable, corrosion-resistant body handles harsh environments and stop-go heat cycles. Ideal for preventive maintenance in mixed city/highway driving, it helps curb misfires, hesitation, and sluggish acceleration linked to contamination. Confirm trim compatibility by VIN, then replace on schedule or when symptoms emerge. Keep your CR-V’s fuel system clean, efficient, and ready for everyday reliability.
Read more
Add to Wishlist
Add to Wishlist
Honda Fuel Filter 16010-ST5-E02 – Honda Accord, Civic, Civic del Sol, Odyssey, CR-V (1994–2001, select trims) safeguards injectors with high-filtration, low-restriction media that maintains stable pressure and crisp throttle response. OE-accurate fittings ensure a dependable, leak-free install, while corrosion-resistant housings stand up to harsh climates and fuel contaminants. Designed for serviceability, it supports predictable maintenance intervals that keep older platforms running smoothly. Verify trim compatibility, then replace per schedule or when symptoms like hesitation, hard starts, or power loss appear. Protect pump life, smooth idle quality, and restore confident drivability with a precision fuel filter built for classic Honda reliability.
Read more
Add to Wishlist
Add to Wishlist
Mitsubishi Fuel Filter MR239580 – Mitsubishi Lancer and sedan models (gasoline, various years) restores crisp throttle response by trapping varnish, rust, and tank debris before they reach precision injectors. High-capacity, low-restriction media protects pump health and keeps fuel pressure steady for quiet idle and confident passing. OE-accurate ports and seals simplify installation and help prevent leaks under heat and vibration. Built with corrosion-resistant housings for long life, it’s a smart preventative upgrade for daily commuters and fleet use. Verify trim coverage by VIN, then replace at factory intervals or when symptoms—hard starts, surging, hesitation—appear to maintain economy, reliability, and enjoyable drivability.
Read more
Add to Wishlist
Add to Wishlist
Mitsubishi Air Filter Other OEM / Aftermarket listings – Lancer, Outlander, Outlander Sport, ASX/RVR, Mirage, Outlander PHEV (2012–2025) delivers high-capture, low-restriction intake filtration tailored to popular Mitsubishi platforms. Precision-pleated media traps fine dust and pollen while preserving airflow for smooth throttle and efficient combustion. OE-accurate frames and seals help prevent bypass dirt that can skew sensors, and rugged materials resist heat and humidity across daily cycles. Choose from reputable brands to match budget and performance goals, including long-life and performance options. Verify fitment by VIN or airbox code, then replace at factory intervals—earlier in dusty regions—to sustain fuel economy, reduce induction noise, and keep your Mitsubishi driving confident.
Read more
Add to Wishlist
Add to Wishlist
Mitsubishi Air Filter MR968274 – Outlander / Outlander Sport (2013–2025), Lancer, RVR / ASX 2.0L / 2.4L NA delivers clean, consistent intake air with a low-restriction element that sustains throttle response and day-to-day efficiency. Precision-molded frames and seals ensure a tight, leak-free fit across shared housings, blocking bypass dust that can contaminate MAF sensors. Durable, moisture-resistant materials hold shape through heat cycles and stop-go driving. DIY replacement is quick and tool-light. Replace at recommended intervals—or sooner in dusty regions—to maintain smooth idle, reduce induction noise, and protect engine components in your Mitsubishi crossover or sedan.
Read more
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Genuine Mitsubishi Front Brake Pad Kit 4605A317 (MN102618) – Lancer (2000–2014), Outlander I/II (2001–2014), ASX (2010–2025) delivers factory braking feel with precise fit, quiet operation, and dependable bite across city, highway, and light off-road use. The OE friction matrix, multi-layer shims, and tuned chamfers/slots suppress squeal and stabilize μ from cool starts to long descents, while rigid backing plates preserve a parallel contact patch that protects rotors from tapered wear. Accurate pad geometry speeds bedding and helps ABS/ESC read consistent signals for straight, predictable stops on wet or dry pavement. Each kit includes the right hardware to refresh the caliper interface, cutting installation time and reducing callbacks. Choose it for authentic fitment, clean wheels, and long, low-maintenance service life.
Read more
Add to Wishlist
Add to Wishlist
The Genuine Mitsubishi Front Brake Pad Kit 4605A261 – ASX (2010–2025), Lancer (2000–2014), Outlander I/II (2001–2014) is an OEM-grade component engineered to provide maximum safety, durability, and reliable performance. Designed according to Mitsubishi’s strict factory standards, this kit ensures excellent stopping power, smooth braking, and optimal fitment. Made from high-quality friction materials, it delivers consistent performance across different driving conditions while minimizing wear and tear on the braking system. Compatible with Mitsubishi ASX, Lancer, and Outlander I/II models, this kit offers peace of mind with precise installation and factory-level dependability. For drivers who prioritize OEM reliability and consistent safety, these genuine front brake pads are the perfect replacement choice.
Read more
Add to Wishlist
Add to Wishlist
G-SPARTS – Leading Auto Parts Supplier Since 2009
Trusted by 1000+ Clients Worldwide | Chinese (BYD, Geely, Chery, …), Japanese (Toyota, Honda, Nissan, …), European (BMW, Mercedes, VW, …) & American (Ford, Chevrolet, Tesla, …) Car Spares | Best Prices & OEM Quality | 15+ Years Expertise | Professional Team, Fast Global Shipping
Hotline:
(+86) 18007124738
WeChat, Telegram, WhatsApp
working hours: 7/24
GuangZhou Office:
Room A78, 24th Floor, No. 111-115, Sports West Road, Tianhe District, Guangzhou, China.
Wuhan Office:
No. C4-01-19-5, 4th Floor, No. 371 Youyi Avenue, Xujiapeng Street, Wuchang District, Wuhan City, China.
- Wholesale Auto Parts from China – Lowest Prices, Top Quality & Dedicated Support
- Fast Shipping. Trusted Parts. Worldwide Delivery.
















