Need help? Call us: (+86) 07 12 47 38 or info@G-Sparts.com
On Sale This Week
Get the Right Part at the Right Price for the Comfort of Your Vehicle
Plakrore maheten. Astronens ultranirad. Dod.
**3‑piece clutch kit** for **Honda K24 manuals**: **Accord 2003–2007**, **CR‑V 2002–2006**, **Element 2003–2009**. Aftermarket ref **EXEDY HCK1004**. Dealer specs: **Ø228 mm (9″)** disc.
Read more
Add to Wishlist
Add to Wishlist
Bosch ZR5SI332 iridium spark plug for Honda Accord (2008–2012) 2.4L — gap 1.1 mm, M12×1.25, 16 mm hex.
Read more
Add to Wishlist
Add to Wishlist
Denso SILZKR6B11G iridium spark plug for Honda Accord (2008–2012) 2.4L — gap 1.1 mm, M12×1.25, 16 mm hex.
Read more
Add to Wishlist
Add to Wishlist
NGK ILZKR6B‑11S iridium spark plug for Honda Accord (2008–2012) 2.4L — gap 1.1 mm, M12×1.25, 16 mm hex.
Read more
Add to Wishlist
Add to Wishlist
O₂ sensor for Lancer, Outlander, Pajero/Montero, Eclipse Cross, ASX, etc. – Upstream or downstream (per Denso SKU). Specs: Denso SKUs are often 4‑wire heated for upstream; wire length/connector vary by SKU.
Read more
Add to Wishlist
Add to Wishlist
O₂ sensor for Pajero/Montero, Triton/L200, Outlander, Lancer (2000s–2010s) – Upstream or downstream (engine dependent). Specs: Upstream commonly 4‑wire heated; older legacy engines may be 1–2 wire non‑heated.
Read more
Add to Wishlist
Add to Wishlist
O₂ sensor for Lancer, Outlander Sport, select Outlander variants (≈2008–2018) – Upstream (pre‑cat). Specs: Typically 4‑wire heated upstream; OE connector & harness; verify probe length.
Read more
Add to Wishlist
Add to Wishlist
O₂ sensor for Honda Accord 2.4L (2003–2007) & related variants – Upstream / pre‑cat. Specs: 4‑wire heated A/F; OE connector; wire length & plug shape must match.
Read more
Add to Wishlist
Add to Wishlist
MAF Sensor for 1999–2005 Mitsubishi Outlander, Galant, Lancer. OEM MD336501 with 5-pin connector, hot-wire type for precise airflow measurement and stable idle.
Read more
Add to Wishlist
Add to Wishlist
MAF Sensor for 1997–2007 Mitsubishi Mirage, Lancer, Montero. OEM MD343605 with 5-pin connector, hot-wire type for precise airflow measurement and stable idle.
Read more
Add to Wishlist
Add to Wishlist
Mitsubishi Fuel Filter MR239580 – Mitsubishi Lancer and sedan models (gasoline, various years) restores crisp throttle response by trapping varnish, rust, and tank debris before they reach precision injectors. High-capacity, low-restriction media protects pump health and keeps fuel pressure steady for quiet idle and confident passing. OE-accurate ports and seals simplify installation and help prevent leaks under heat and vibration. Built with corrosion-resistant housings for long life, it’s a smart preventative upgrade for daily commuters and fleet use. Verify trim coverage by VIN, then replace at factory intervals or when symptoms—hard starts, surging, hesitation—appear to maintain economy, reliability, and enjoyable drivability.
Read more
Add to Wishlist
Add to Wishlist
Mitsubishi Air Filter Other OEM / Aftermarket listings – Lancer, Outlander, Outlander Sport, ASX/RVR, Mirage, Outlander PHEV (2012–2025) delivers high-capture, low-restriction intake filtration tailored to popular Mitsubishi platforms. Precision-pleated media traps fine dust and pollen while preserving airflow for smooth throttle and efficient combustion. OE-accurate frames and seals help prevent bypass dirt that can skew sensors, and rugged materials resist heat and humidity across daily cycles. Choose from reputable brands to match budget and performance goals, including long-life and performance options. Verify fitment by VIN or airbox code, then replace at factory intervals—earlier in dusty regions—to sustain fuel economy, reduce induction noise, and keep your Mitsubishi driving confident.
Read more
Add to Wishlist
Add to Wishlist
Mitsubishi Air Filter MR968274 – Outlander / Outlander Sport (2013–2025), Lancer, RVR / ASX 2.0L / 2.4L NA delivers clean, consistent intake air with a low-restriction element that sustains throttle response and day-to-day efficiency. Precision-molded frames and seals ensure a tight, leak-free fit across shared housings, blocking bypass dust that can contaminate MAF sensors. Durable, moisture-resistant materials hold shape through heat cycles and stop-go driving. DIY replacement is quick and tool-light. Replace at recommended intervals—or sooner in dusty regions—to maintain smooth idle, reduce induction noise, and protect engine components in your Mitsubishi crossover or sedan.
Read more
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
NiBK RN1214V Vented Front Rotor for BYD F0 1.0L (2008–2025) is engineered for rapid heat rejection, low runout, and a clean, stable braking surface that beds quickly with OE-style pads. Precision machining and balanced vane geometry support quiet operation and predictable ABS behavior in city or highway use. Corrosion-resistant hat/edge protection helps the rotor stay tidy between services, while OE-matched dimensions make installation straightforward for workshops and DIYers alike.
Read more
Add to Wishlist
Add to Wishlist
NiBK PN1841 Front Brake Pads (Bosch) for BYD F0 1.0L (2008–2025) deliver precise fit, calm NVH, and rotor-friendly wear for city and highway duty. Tuned chamfers, slots, and multilayer shims work with Bosch-type calipers for quiet, confident braking and reliable pedal feel in all seasons
Read more
Add to Wishlist
Add to Wishlist
NiBK PN8397 Rear Brake Pads for BYD F6 2.0L (2008–2025) deliver precise fit, calm NVH, and rotor-friendly wear for mixed city and highway duty. Engineered chamfers, slots, and multilayer shims work with OE-style backplates to reduce squeal, while a stable friction curve supports confident pedal feel in wet or dry conditions. The compound encourages an even transfer layer that preserves disc finish and keeps wheels cleaner. Each boxed set arrives inspection-ready for professional installation with consistent thickness, density, and bonding, helping workshops minimize rework and return vehicles to service on schedule.
Read more
Add to Wishlist
Add to Wishlist
NiBK PN1431 Rear Brake Pads for BYD F3/F3R (2005–2025) deliver precise fit, calm NVH, and rotor-friendly wear for daily, fleet, and highway duty. Engineered chamfers, slots, and multilayer shims work with OE-style backplates to reduce squeal and sustain a consistent transfer layer. Compound tuning supports confident bite at low speeds and predictable modulation at higher loads, while stable friction helps ABS and stability systems perform as intended. Each boxed set arrives inspection-ready, with consistent thickness, density, and bonding for straightforward installation. If you maintain BYD F3/F3R platforms, this friction set restores refined pedal feel quickly, minimizing rework and keeping vehicles in service with fewer interruptions.
Read more
Add to Wishlist
Add to Wishlist
NiBK PN1472 Front Brake Pads for BYD F3/F3R (2005–2025) & G3 (2009–2025) deliver precise fit, stable friction, and low-NVH road manners for daily, fleet, and highway duty. Engineered chamfers, slots, and multilayer shims work with OE-style backplates to reduce squeal while supporting confident pedal feel in wet or dry conditions. Rotor-friendly formulation encourages an even transfer layer that preserves disc finish and keeps wheels cleaner between washes. Each set arrives ready for professional installation with consistent thickness, density, and bonding for long, predictable service. If you maintain BYD F3/F3R or G3 platforms, these pads align well with factory caliper geometry and help restore braking refinement with minimal break-in time.
Read more
Add to Wishlist
Add to Wishlist
NiBK PN0781 Front Brake Pads for BYD e6 (2011–2025) / S6 (2014–2017) / Song Max (2015–2025) provide precise fitment, stable friction, and engineered comfort for daily use and fleet duty. Designed to minimize noise and dust while preserving rotor life, these pads balance bite, modulation, and fade resistance across city, highway, and mixed driving. Backplates, shims, and chamfers are tuned for the BYD caliper package, while the friction compound targets confident pedal feel in all seasons. For buyers seeking proven quality with professional-level consistency, they offer the blend of safety, longevity, and value you expect from a premium replacement set—ready for clean installation and reliable results.
Read more
Add to Wishlist
Add to Wishlist
NiBK PN0377 Front Brake Pads for early Changan CS35 / Alsvin (OE 3501180 BQ01 & 3501280 BQ01) provide dependable braking with extended durability, quieter operation, and precise OEM fitment. Engineered using advanced friction materials, these pads minimize dust, reduce rotor wear, and deliver consistent stopping power. Perfectly tailored to early CS35 and Alsvin models, they ensure both safety and cost efficiency for everyday drivers.
Read more
Add to Wishlist
Add to Wishlist
NiBK PN8813 Rear Brake Pads (ATE) for Changan CS55 (2017–2025) / CS35 Plus / Eado Plus are engineered for quiet operation, durability, and superior stopping power. Using advanced ATE technology and premium friction materials, these pads reduce noise, minimize dust, and extend service life. Designed to OEM specifications, they ensure a perfect fit and reliable performance across multiple Changan models, providing consistent safety and comfort for everyday driving.
Read more
Add to Wishlist
Add to Wishlist
NiBK PN8022 Rear Brake Pads for Changan CS55 Plus/Qiyuan Q05/UNI S/UNI T (2021–2025) deliver consistent braking power, quiet operation, and extended durability. Built with advanced low-dust friction materials, these pads ensure cleaner wheels, smoother stops, and long-term cost efficiency. Designed to match OEM specifications, they provide a perfect fit for the CS55 Plus, Qiyuan Q05, UNI S, and UNI T, guaranteeing dependable performance and enhanced driving comfort in every condition.
Read more
Add to Wishlist
Add to Wishlist
NiBK PN8014 Front Brake Pads for Changan CS55 (2017–2025) / CS85 (2019–2025) provide premium braking performance with quiet operation and long-lasting durability. Built with advanced friction materials, they reduce brake dust, minimize noise, and deliver consistent stopping power. Designed to meet OEM standards, they are a perfect fit for CS55 and CS85 models, ensuring safety, comfort, and reliability in all driving conditions.
Read more
Add to Wishlist
Add to Wishlist
NiBK PN8029 Front Brake Pads for Changan CS75 Plus (2019–2025) are engineered for dependable safety, quiet braking, and long-lasting durability. Built with advanced friction materials, these pads reduce dust, minimize noise, and ensure consistent stopping power. Designed to meet OEM standards, they are a perfect fit for the Changan CS75 Plus, offering reliable performance for both city driving and demanding road conditions.
Read more
Add to Wishlist
Add to Wishlist
G-SPARTS – Leading Auto Parts Supplier Since 2009
Trusted by 1000+ Clients Worldwide | Chinese (BYD, Geely, Chery, …), Japanese (Toyota, Honda, Nissan, …), European (BMW, Mercedes, VW, …) & American (Ford, Chevrolet, Tesla, …) Car Spares | Best Prices & OEM Quality | 15+ Years Expertise | Professional Team, Fast Global Shipping
Hotline:
(+86) 18007124738
WeChat, Telegram, WhatsApp
working hours: 7/24
GuangZhou Office:
Room A78, 24th Floor, No. 111-115, Sports West Road, Tianhe District, Guangzhou, China.
Wuhan Office:
No. C4-01-19-5, 4th Floor, No. 371 Youyi Avenue, Xujiapeng Street, Wuchang District, Wuhan City, China.
- Wholesale Auto Parts from China – Lowest Prices, Top Quality & Dedicated Support
- Fast Shipping. Trusted Parts. Worldwide Delivery.















